Pressure Washing Tips and Information

• Invest in interchangeable nozzles and tips in order to serve more than one purpose cleaning.
• Only use chemicals and pressure washer cleaning solutions that are approved for pressure washer use. (These can include: Super Film Remover and Citrus Degreaser).
• Always test the pressure washer for its power. Spray a few feet away from any object. Gradually clean the surface.
• Be careful when cleaning vents, light fixtures, and windows. They can easily break or become hurt if aimed directly at them.
• It is best to spray horizontally with smooth left to right movements.
• After spraying a surface with cleaning solution, let it sit before rinsing. Allow 5 to 10 minutes for the detergent to dissolve the mud, dirt, or mildew.
• Never use a ladder when operating a pressure washer.
• Cover all outdoor electric outlets and wear goggles to protect your eyes and face.
• Remove shutters, this is where most spiders and wasps like to nest.
• Never use bleach as a cleaning solution.
• Cold water pressure washers are normally used to clean wood and vinyl siding.
• Work at an angle around windows.
• Use an adjustable extension wand to wash high areas.

About Charlotte House and Commercial Cleaning Services

With a strong reputation for diligence, Bucket ‘n’ Broom Charlotte House and Commercial Cleaning Services provides the utmost quality of professional maid service cleaning and customer service. Serving the home and office needs of Charlotte, NC, Bucket ‘n’ Broom provides more than the ability to just clean. Services include general cleaning, deep cleaning, bathroom and kitchen cleaning, special occasion cleaning, and post construction cleaning.

Visit us online at www.bucketnbroom.com/charlotte-house-commercial-cleaning-services

Charlotte Cleaning Service: Pressure Washing Tips is a post from: Pressure Washer Solutions

The first thing you want to do a property management, is to lower the frequencyof the service, have to say, come every two months rather than twice a month. This means the concrete is much dirtier with each visit, and yet the corporate setting, you have probably also want a break in price otherwise, well, they will cancel the account, and hire someone else.- Concrete mixer

During a recession, there are many people who are willing, for peanuts, which have given freely, and they must be no money in the middle of the night cleaning concrete work with oldSteam cleaner they bought Craig’s List. But, if you have the right equipment can also earn significantly the cost and frequency of service and more money. How, you question?

Next, I recommend a excellent and solid hot water pressure washer with 7-8 gallons per minute that a hydro-twister can type cleaning machine, and run full-tilt with hot water, such as the reduction is your cleaning time up to half the time. In addition, you’ll need on a trailer with a hose for high pressure cleaners and tooconstantly filling a reservoir for water. READ MORE http://www.concretemixer.bankcreditsite.com/power-washing-equipment-considerations-for-concrete-cleaning/

Power Washing Equipment Considerations For Concrete Cleaning is a post from: Pressure Washer Solutions

The Pressure Washing Edge

Industrial pressure washers on their own are powerful cleaning tools because of the way they operate. From small pressure washing units to commercial pressure washers, they all use pressurized water to forcibly remove deposits from surfaces. A number of factors determine the power of these units. First, one needs to consider the pressure levels. There are pressure cleaning machines available with relatively low pressure levels which are ideal for cleaning less durable surfaces. Tougher surfaces and challenging sedimentation usually call for power washers with higher pressure levels.

Another thing to consider is the mode of temperature operation. Relatively light cleaning jobs are usually accomplished using cold water pressure washing units. For harder deposits and stains, hot water pressure washers are ideal. But, when it comes to degreasing and the most demanding applications, steam pressure washing units are ideal. High pressure levels coupled with the power of steam can do wonders in softening and removing heavy grease.

Optimum water flow rates further ensure that the grease is washed away completely. If you do not have a steam pressure washer unit, green degreasers can help in removing grease, even with cold water pressure washing units.

The Green Chemical Connection

In the absence of commercial pressure washer with steam, green chemicals can be used to break down and remove grease deposits. These cleaning solutions work by penetrating grease molecules and emulsifying them from inside. These tiny particles are then made to repel each other and do not re-adhere to the cleaned surface. In this way, even tough grease deposits can be removed completely and with relative ease. As an added benefit, this combination of green chemicals and pressure washing machines is an environment friendly alternative to toxic cleaning methods. Even though green cleaning products are tough enough to remove grease, they do not harm or pollute the environment in any way.

Coupled with cold or hot water pressure washing units, these green degreasers can help in removing oil and grease stains by safely increasing the power of these machines. They can be very helpful in areas like gas stations, where oil from vehicles builds up, and even commercial kitchens that are forced to deal with light cooking grease stains. The cleaning power of steam pressure washing machines can also be accentuated with green degreasers. For industrial heavy degreasing jobs, these degreasers can go a long way in helping to soften heavy grease sedimentation.

Using hot or cold water pressure washers with green degreasers can be more economical as well. Although steam pressure washing units are powerful, lighter jobs can be fulfilled with hot or cold pressure washing units and green cleaners. A cold water pressure washing machine and a green degreaser can effectively remove large amounts of oil and grease stains and save you money, as well.

Turn Pressure Washing Machines into Ultimate Degreasers is a post from: Pressure Washer Solutions

Pressure washer accessories, such as GFCI cords and plugs, brass couplings, hose restrictors, excellent pressure gauges, winterizing kits, battery boxes, unloader valves can extend the life of your existing equipment. They can also just simply make your job simpler and more professional looking.

To expand the list of services you offer, consider adding a sand blaster (medium to heavy duty equipment is available) or sewer jetter (can clean pipes and tubes from 1” –6” in diameter) to your system. Chemical injectors are a necessity when you need the extra cleaning power of chemicals. There are high or low-pressure chemical kits with adjustable chemical injectors. There are metering valves, nozzles for distance or maximum pressure, and systems that save your pump, lance, hose and gun by having the chemicals by-pass them.

Add the service of duct cleaning to your repertoire, and shine above the competition even more. Made to be corrosion-resistant and with self-lubricating bearings, the Swiss made carbide swivel duct cleaner is one fantastic pressure washer accessory. Working with hot or cold water, duct cleaners clean any kind of duct, vent, chimney, or chute. And don’t forget the market for cleaning restaurant hoods and trash chutes and even kegs and barrels.

Some surfaces can be cleaned with pressure and cold water alone, but many cleaning jobs will go quicker with (and some downright require), hot water. If you don’t yet have the power of hot water, it should be one of your next pressure washer accessories. There are many types to choose from that can be added to existing cold water pressure units.

If you want to help the environment, there is another excellent pressure washer accessory to help you do so. The “wash water filter system” protects the environment by re-using wash water that has been filtered. When power washing floors, driveways, or any flat surface, this system harbors, collects, and then filters the dirty water. Using portable dams and drain covers, and a closed vacuum, state-of-the-art filter, and holding tank system, this wash water filter set-up makes sense economically and environmentally too.

For ease, comfort, and professionalism, there are pressure washer accessories such as foot valves (lets you operate the pump from a distance), extension wands and brush attachments, carts, skids, hose reels, magnetic starters, and so much more they are hard to list here. It will benefit the pressure washer owner to know of the many accessories available and their applications. For instance, by checking out the accessories available, you would learn that simply adding a rotary nozzle would increase cleaning power and efficiency for large, flat surfaces. A rotary nozzle uses centrifugal force and is 200% more efficient than a 25° flat fan nozzle. Rotary nozzles come in small (2,500 psi), medium (3,000 psi), large (4,350 psi) and extra large (5,000 psi), and there is a stainless steel, super-heavy-duty (7,350 psi) rotary nozzle.

Of course, the pressure washer accessories list includes replacement parts—from engines and pumps (and parts for them), through to tires for hose reels and hardware for all mechanisms.

Enhance Your Power Washing Business With Pressure Washer Accessories is a post from: Pressure Washer Solutions

First you have to gather the equipment needed to complete this task.  You are going to need a empty 5 gallon pail, stainless steel bug sprayer, access to water with a hose, muriatic acid or some other masonry cleaner, a scrub brush, steel wire brush, protective gear waterproof gear, gloves,jacket, hood, pants, boots and most importantly eye protection, acid does not feel excellent in your eyes.  Lastly you will need a excellent gas powered pressure washer you can buy one for around 0.00 or just rent one for a day.

Dirty brick and stone walls can be handles a few different ways you can use muriatic acid or a less perilous cleaner such as sure clean or a pressure washer or both together.  If you opt to use a cleaner wet the surface first with a hose.  Next apply cleaner with a hard plastic bristle brush or use the bug sprayer to apply it.  Be sure to dilute the cleaner with water first to make it safer to use, follow the instructions on the cleaner you are using.  Try not to breath in the fumes from the cleaner either, it can make you very dizzy and vomit.  In really dirty area you may have to scrub really hard or use a steel wire brush moderately over the affected area.  If you are using acid it should bubble up on dirty area straight away but it doesn’t work all that well on moss.  After you have scrubbed the wall down hose it off or I recommend using a pressure washer with the fan tip to clean it off.  A pressure washer itself is capable of cleaning most of the surfaces if done properly, but don’t get too close with the tip you blast a hole in your brick or mortar joints if they are aged.

If you are cleaning concrete it can be done much the same way as what you did  the brick and stone wall.  But you must be more consistent with your pressure washer.  If not you will easily see where you have wash and where you have not sometimes giving your concrete an hideous striped look.

If you have an ancient sandstone surface such as a porch or steps that are flat there is another method you should use to clean them.  For this project you will need a rubbing stone or another piece of sandstone that is about the same hardness.  This does require some back breaking work but you will be very pleased with the results when you are done.  Take your rubbing stone a rub it all over the surface till you get a nice sandy grit all over the surface, in dirtier area you may have to scrub a small harder.  Once complete simply sweep the surface or wash it off with a hose. Do not use acid or a pressure washer on sandstone surfaces, they are very easily hurt.

If you are unsure of how to complete this task you should hire a qualified mason or pressure washing contractor to take care of this for you.  Working with acid and pressure washers can be perilous for both you and the people around you.  If you are not careful you can easily hurt surfaces if you do not clean them properly.

Pressure washing Techniques is a post from: Pressure Washer Solutions

A pressure washing device directs a stream of water at remarkably high pressure to remove nasty build-ups on surfaces. These build-ups include mold, grime, grease, mud, and dirt, to name the basic targets of high-pressure washing. Build-up from oil and manufacturing facilities, for example, requires the power of high-pressure washers to remove.

The high-pressure washer consists of these components: the motor that works the pump, the high-pressure hose, and the trigger gun. There are many different kinds of nozzles that go onto the trigger gun, depending on the target surface and the strength of the build-up that is to be removed. Some nozzles make a triangular plane, and others direct a pencil-thin stream of concentrated water at the spot. This pencil-thin stream can spiral around very quick, therefore hitting more surface area with a small, directed jet of water.

Depending on the job, some pressure washers include a detergent in the jet of water, to help in the removal of the build-up.

The water jets can be cold or hot, or steam-heated up to 330 degrees Fahrenheit.

Different pumps can be powered by a number of sources, such as electric, gas, or propane. Talk with your commercial pressure washing service about which option will best fit the job. You may choose on the electric motors because they are quieter and don’t produce any exhaust (an environmentally harmful bi-product). (And question your commercial pressure washing service provider if they offer free estimates.)

Commercial pressure washers can pump water and shoot it onto a surface at 5,000 pounds per square inch (PSI). That’s much more powerful than any high-pressure unit you could rent or buy from domestic outlets.

The entire list of surfaces that commercial pressure washers can be used for could keep you up reading all night, but here is a partial list: Gas stations, restaurants, bathrooms, high-rise buildings, drive-throughs, sidewalks, driveways, awnings, parking lots, and bus stops. How do construction sites get cleaned up? How does graffiti disappear from the sides of buildings? How can you degrease heavy machinery? High-pressure washers can do the job.

Some uses of pressure-washing services go beyond cleanup and have to do with pre-treating a property. Take the painting of a house, for example. Before treating the house and painting it, it may be best to pre-clean the surface of the house. This process can eliminate flaws in the wooden and concrete surfaces and allow for a better, smoother painting job.

When it comes to pressure-washing concrete surfaces or homes (which are often sided with wood), different degrees of pressure are used. For concrete surfaces, 4000 PSI is the norm. That intensely high pressure is excellent at clearing out mold, mildew, and dirt that may have caked onto a road, parking lot, driveway, or building over the years.

For most homes, a lower pressure is used. It’s safer for the house and will not threaten the integrity of exteriors like stucco, particle boards, wooden or vinyl or aluminum siding, brick, and cedar. It’s recommended that you pressure-wash your home every 12 to 18 months. It improves the look and protects the paint and siding of the house from mold and mildew.

Who should call a commercial pressure washing service?

Before you paint your house, you may want to pressure-wash it to improve the surface.

Commercial properties will hire a commercial pressure washing service to improve the look of their businesses and properties. They’re thinking that if their places of business look clean, clean, and attractive, there is a higher likelihood that customers will gravitate toward them. Not many people choose a dirty-looking establishment over a clean, clean place. And clean and clean means outside and inside.

Manufacturers need to keep up the functionality of their equipment. Greasy, oily, grimy equipment can be a safety hazard and could cause a lag in production: Equipment that’s not clean may not work as efficiently. That’s why manufacturers will hire a commercial pressure washing service to make sure their equipment is not only up to code, but clean and efficiently working.

Siding and roofing needs periodic cleaning to get rid of mold and mildew. Those substances can erode the paint on the home, and mildew could pose a health hazard.

What are the benefits and drawbacks to commercial pressure washing?

Water pressure from the washer’s nozzle is very perilous. When workers are performing their tasks, you’ll have to make sure you and your family are out of reach of the pressure washers. The jets of water are so quick and concentrated that they could really strip the flesh off of bone at close range.

And if aimed incorrectly, the jets of water could break up the asphalt even in efforts to clean it.

Though cleaning a house’s surfaces before painting can improve the quality of the paint job, it often takes several days for the house to dry before it’s ready to be painted. Some homeowners might not be able to wait that long. Specifically, it takes four hours to pressure wash a two-tale house, but several days in warm weather for it to dry.
Then again, many pressure washing services use biodegradable chemicals.
Hiring a pressure washing service can cost less than replacing the surfaces that are dirty.
Pressure washing can restore exteriors, and it gets rid of harmful mold and mildew.
Pressure washing extends the life of roofs and roof shingles.
And a commercial pressure washing service can help restore a building and business site so that it is attractive and inviting for potential patrons.

The bottom line with commercial pressure washing:

Pressure washing directs a strong current of water at high pressures onto a surface to clean off dirt, grime, mold, and mud. This process can restore a property or a business, and generally make roads and buildings look more attractive, while protecting against the health hazards of mold and mildew.

Commercial Pressure Washing – Cleaning Services is a post from: Pressure Washer Solutions

Serious injuries from a pressure washer may include abrasions, slips and falls, blindness, and high-pressure injection. The sheer pressure of water alone is powerful enough to cause an injury, but using chemicals during the cleaning process can make a terrible situation even worse. Injuries and wounds sustained while pressure washing can appear deceptively benign but should always be examined and treated by a doctor or qualified emergency care provider.

Abrasions are a common injury associated with pressure washing. To reduce the risk of getting abrasions, wear protective clothing including gloves, closed shoes and long pants. Avoid pointing the pressure washer at yourself, other people and pets. Do not depress the trigger until you are sure of where the gun is pointing and use care not to spray your hands, feet or legs.

Slips and falls can lead to hospitalization or death. Wet surfaces will be more slippery and ice can form rapidly in cold climates. Using a pressure washer on a ladder or other elevated surface is perilous due to the backward force of a pressure washing gun, which can easily throw a person off balance. Know your work area and how water will affect the surface. Use appropriate safety harnesses when operating a pressure washer from a ladder, lift, or crane.

Blindness and other eye injuries can occur not only from being sprayed directly in the eye, but from foreign objects or chemicals flying through the air. The power of water at high pressure can send rocks, nails, glass, and other harmful debris hurtling through the air at damaging speeds. Chemicals and detergents can also splash up from the surface. Always wear shock resistant and splash resistant safety glasses or goggles when operating a pressure washer. In the event of a chemical-related eye injury, seek immediate medical help and be sure to take the Material Safety Data Sheet (MSDS) or mark explaining the chemical’s properties for the physicians’ review.

High-pressure injection (HPI) occurs when water and other debris/chemical penetrates the skin and causes deep tissue hurt. Serious infections are highly likely with HPI and may ultimately lead to permanent disability or amputation of the affected body parts. To lessen the risk of HPI, use wide angle or fan nozzles to disburse the pressure over a wider area. Solid stream nozzles can do more harm and should be avoided whenever possible. As with abrasions, wear protective clothing and never point the pressure washer at yourself or another person.

Special concerns for each specific type of pressure washer should also be considered. With electric pressure washers (as with any electrical tool around water) there is the risk of electric shock. Use of gas-powered pressure washers can lead to asphyxiation by carbon monoxide inhalation when used without proper ventilation. Gas units are also loud and may result in hearing loss – hearing protection should be worn at all times. Misuse of hot-water and steam pressure washers may result in serious burns that could likely require medical attention. When operating any pressure washer be sure to read and know its operation manual, paying special attention to all safety precautions.

Do not be one of the thousands of individuals each year that underestimate the power of a pressure washer and ultimately require hospitalization for their injuries. Give the machine the respect it deserves and use necessary safety measures for each particular situation. If you have any doubts about operating a machine, consider hiring a mobile pressure washing service to complete your project. A quick Internet search for “pressure washing in (your city)” will likely result in dozens of professional companies that would be pleased to give you a free estimate.

For instance, a search for “Pressure Washing in Phoenix” will bring up http://www.acmepowerwash.com where you can learn more about pressure washing, see photos of industrial pressure washers in action, or request a free estimate from a professional pressure washing company with over 13 years of industry experience.

Common Pressure Washing Injuries And How To Avoid Them is a post from: Pressure Washer Solutions

The first thing is to clarify what is meant by the terms hot and cold water cleaning. Knowing the difference will help you know and choose which one you will need.

To provide hot water pressure washing you need a specific type of pressure washer with a burner that will heat the water that is supplied. These burners usually run on kerosene or diesel fuel, but can also be powered by natural gas or electricity. They are capable of heating water in excess of 200 degrees so caution must be used when using this type of equipment. These machines are usually quite large and can weigh over 1000 lbs.

Most cold water machines are much smaller and portable since they do not have a burner and the temperature of the water supplied remains constant. This makes these types of pressure washers much safer for do-it-yourself enthusiast.

The main difference between these machines depends on the substrate you want cleaned. Please know that you can not clean just anything with pressure washers, especially when it comes to hot water systems. Here are some various things each of these cleaning techniques may be used for.

1. Hot water pressure washers are brilliant for cleaning impervious surfaces such as concrete and are the simplest way to remove gum and oil stains without causing hurt. Hot water washers are brilliant for commercial cleaning applications as well. They allow for a more thorough cleaning of driveways, sidewalks and walkways which help present customers with a clean image from the time they arrive.

2. Cold water pressure washers are brilliant for residential cleaning applications. In combination with the proper soaps they are fantastic for cleaning all types of siding such as vinyl, drivit, stucco, and aluminum. As long as there is no gum or major oil staining, cold water is also fantastic for cleaning porches, walkways, patios, pool decks and much more.

Hot water offers no better cleaning than cold water systems for parts of your home such as siding. This means there is no benefit for a homeowner to use this type of cleaning method. The only benefit is for the contractor, as in some cases it can speed up the cleaning process and save them time. This is a savings that is usually not passed along to the home owner either.

Most commercial concrete cleaning applications require the removal of gum and oil. There is no better way to remove these without causing hurt than a hot water pressure washer.

The type of pressure washing method you will really need depends on whether or not you are a home owner or a business owner along with what it is that you need cleaned specifically. So now that you know the difference, you will not have to worry about paying for a service you do not need.

Cold Water vs Hot Water Pressure Washing Methods is a post from: Pressure Washer Solutions

Compliments of Delco Cleaning Systems of Fort Worth at 800-433-2113, email: delco@dcs1.com , www.dcs1.com , or www.pressurewash.com .

Duration : 0:9:52

[youtube _7qu3PzJKUI]

Pt 8/14 Pressure Washer First Aid Training for Pressure Power Wash Operators is a post from: Pressure Washer Solutions

Compliments of Delco Cleaning Systems of Fort Worth at 800-433-2113, email: delco@dcs1.com , www.dcs1.com , or www.pressurewash.com .

Duration : 0:9:49

[youtube OxWhKpiSWd4]

Pt 12/14 Pressure Washer First Aid Training for Pressure Power Wash Operators is a post from: Pressure Washer Solutions