My pressure washer is not workin?
It will crank up easily and its groundbreaking new?
But when i pull the trigger no ater is turned on?
I know the hose is on and nothings clogged?
PLEASE HELP ME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Sounds like the regulator is stuck. Try beating on the brass part that the hose is hooked to. It will get stuck. If it is new, take it back.
Categorized | pressure washer hose
Pressure washer?
Posted on27 October 2009.
3 Responses to “Pressure washer?”
Trackbacks/Pingbacks
Leave a Reply
Sounds like the regulator is stuck. Try beating on the brass part that the hose is hooked to. It will get stuck. If it is new, take it back.
References :
make sure your hoses are tight is sounds crazy but mine did the same thing once and i tightened the hoses a small more and it worked hope this helps
References :
Are you siphoning water or is it fed by city or well pump pressure?Most of these pumps are of the check valve type.So if you are using something like city water pressure, even while the engine is off you should get a stream of water out of the gun, as it will push the intake checks open and then simply push the output checks open.If you are siphoning water, then things vary some.In either instance if one of the intake check valves is stuck in the open position due to some crud you will get no pressure build-up.This is a simple explanation since the details could lead to a dissertation without knowing more about your situation.
References :